Details

Product Specification :

Continuous rating input : 800W

Impact Energy : EPTA-Procedure 05/2009: 2.4 J

Our experimental conditions: 2.9 J

Capacities: Concrete: 26 mm (1″)

Core Bit: 68 mm (2-11/16″)

Diamond Core Bit (Dry Type): 80 mm (3-1/8″)

Steel: 13 mm (1/2″)

Wood: 32 mm (1-1/4″)

Blows Per Minute (BPM) : 0 – 4,600

No Load Speed (RPM) : 0 – 1,200

Sound Pressure Level : 90 dB(A)

Sound Power Level : 101 dB(A)

Noise K Factor : 3 dB(A)

Vibration Level : Hammer Drilling into Concrete: 15.0 m/s²

Vibration K Factor : Hammer Drilling into Concrete: 1.5 m/s²

Vibration Level : Chiselling Function w/ Side Handle: 9.5 m/s²

Vibration K Factor : Chiselling Function w/ Side Handle: 1.5 m/s²

Vibration Level : Drilling into Metal: 2.5 m/s² or less

Vibration K Factor : Drilling into Metal: 1.5 m/s²

Dimensions (L x W x H) : 385x77x209 mm

Net weight : 2.8 – 3.3 kg

Power supply cord : 2.5 m (8.2 ft)

Re-located operating mode lever for increased protection and durability; enables switch to rotate both left and right
Improved bit guide for increased bit stability during drilling applications
Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
Soft grip provides more comfort and control
High durability design with zig-zag armature varnish, enhanced sealing, improved impact bolt and impact reducing cushion ring
Compact & Lightweight design obtained by minimizing motor weight, with a newly designed tool-structure
Powerful 800 W motor delivers 2.4 J of impact energy to handle the most demanding applications
Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
Forward/reverse lever – position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse
3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
Variable speed trigger allows operator to adjust speed based on materials or application
40 Bit angle settings allow the bit to be set at optimum positions
One-touch sliding chuck for easy bit installation and removal
Depth gauge for increased drilling consistency
Recessed lock-on button for continuous use
Optional dust cup connectable to Makita vacuum cleanesr without joint parts