Details

Product Specification :

Continuous rating input :1,100W

Impact Energy :

EPTA-Procedure 05/2009: 8.3 J

Our experimental conditions: 11.4 J

Capacities:

Concrete (w/ TCT Bit): 40 mm (1-9/16″)

Concrete (w/ Core Bit): 105 mm (4-1/8″)

Blows Per Minute (BPM) :1,450 – 2,900

No Load Speed (RPM) : 250 – 500

Sound Pressure Level : 92 dB(A)

Sound Power Level : 103 dB(A)

Noise K Factor : 3 dB(A)

Vibration Level : Chiselling Function w/ Side Handle: 9.0 m/s²

Vibration K Factor : Chiselling Function w/ Side Handle: 1.5 m/s²

Vibration Level : Chiselling Funtion w/ Side Grip: 9.0 m/s²

Vibration K Factor : Chiselling Funtion w/ Side Grip: 1.5 m/s²

Vibration Level : Hammer Drilling into Concrete: 10.0 m/s²

Vibration K Factor : Hammer Drilling into Concrete: 1.5 m/s²

Dimensions (L x W x H) :479x106x263 mm (18-11/16″x4-3/16″x10-3/8″)

Net weight : 6.2 – 6.4 kg (13.7 – 14.1 lbs.)

Power supply cord : 5.0 m (16.4 ft)

Powerful 1,100 W motor delivers 8.3 J of impact energy to handle the most demanding applications
Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
LED service light notifies the user approximately 8 hours before the brushes need to be replaced
LED power light indicates switch failure or cord damage
Variable speed control dial enables user to match the speed to the application for greater versatility
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
Depth gauge for increased drilling consistency